Metallurgist 2005

Английская версия российского издания для специалистов горнодобывающего комплекса, металлургии черных, цветных и специальных металлов и сплавов, которое издается с 1956 года и имеет устойчивую репутацию ведущего отраслевого научно-технического и производственного издания.
Основная тематика журнала «Металлург» - состояние горно-металлургического комплекса, научно-технические разработки, диагностика и ремонт оборудования, патенты и ноу-хау, новости зарубежной техники, качество материалов и продукции, современные технологии, автоматизация и управление, охрана труда, охрана окружающей среды, ресурсосбережение, экономика и маркетинг, профессиональная подготовка, презентация фирм, история металлургии, художественная обработка металла.
Published since 1956, Metallurgist is the leading Russian journal in metallurgy. Coverage includes metallurgy of ferrous and nonferrous, rare and precious metals, equipment and automation, work and environmental safety, new inventions and patents, resources and energy savings, quality and certification, and more.
Metallurgist is a translation of the peer-reviewed Russian journal Metallurg.I. V. Babaitsev, N. A. Smirnova and O. V. Prokopova - Analysis of the Degree of Conformity of the Compositions of Exothermic Mixtures to Standards on Environmental and Explosion Safety
G. V. Dzhandieri - Ways of Improving the Efficiency of the Production of Cast Iron and Ferroalloys in Blast Furnaces and Electric Furnaces
S. K. Nosov, V. A. Sinel’nikov, A. A. Kirichkov, P. I. Yugov and A. V. Amelin, et al. - Converter Production of Clean Naturally Alloyed Steel from Vanadium Pig Iron for Use in Transportation Equipment
A. I. Zorin, A. L. Podkorytov, V. B. Zakharov and S. N. Kovaleva - Production of Boron-Bearing Grades of Steel with a Regulated Sulfur Content at the Chelyabinsk Metallurgical Plant
V. N. Nikitin, S. I. Kiselev, T. N. Popova, V. M. Maslyuk and V. Yu. Kolesnikov - New Weldable High-Strength Wear-Resistant Steel with a Minimum Tensile Strength of 1050 N/mm2
M. P. Mori and A. A. Bogatov - Improving the Technology and Production Practices in Tube-Drawing Shops
V. V. Koptsev - Burner for Kilns
A. I. Shevelev and S. G. Synkov - Technology for Obtaining Special Shapes Made of Lead Alloys
Al. G. Shalimov - Scientific-Technical Support for Innovation at Companies, Research Institutes, and Other Organizations in the Metallurgical Sector
A. N. Dmitriev, Ya. S. Mukhitdinov, V. R. Rakhimov and F. G. Sitdikov - Pyrometallurgical Technology for Processing Titanomagnetites from the Tebinbulak Deposit
I. E. Sperkach and I. F. Kurunov - Methods of Intensifying Blast-Furnace Operation
A. A. Makrushin, A. V. Kuklev, Yu. M. Aizin, S. V. Zarubin and A. M. Lamukhin, et al. - Mold with Slot-Like Channels and Nickel-Coated Walls for Radial-Type Continuous Slab Casters
O. V. Ivantsov, B. K. Kaskin, A. M. Vas’kin, A. S. Viventsov and E. A. Zimakov - Stabilizing the Mechanical Properties of the Rolled Products after Reconstruction of the Laminar Cooling System on a 1700 Continuous Hot-Strip Mill
Yu. V. Bodrov, P. Yu. Gorozhanin, A. I. Grekhov, S. Yu. Zhukova and M. N. Lefler, et al. - New Technologies for Making High-Quality Drill Pipe
N. I. Grigor’eva, G. I. Tarabaev, S. N. Kudryavtsev and I. A. Gavrilova - Russian Lubricating Oils for Rolling Mills with Fluid-Friction Bearings
A. N. Nikulin - Automation of Production Processes in Metallurgy
L. G. Znamenskii, O. V. Ivochkina and B. A. Kulakov - Electro-Impulsive Nanotechnology for Preparing an Aluminum — Refractory-Metal Master Alloy
V. M. Kurkin, V. A. Kobelev, A. Naroditskis, M. A. Gurkin and V. P. Nevraev, et al. - Ways of Optimizing the Preparation of Sintering-Machine Charges
S. V. Sukharev, I. V. Kushnerev, S. A. Korolev, S. V. Kazakov and Yu. S. Demin - Improving the Out-of-Furnace Treatment of Wheel Steel by Using an Integrated Technology
N. G. Koryt’ko, P. G. Loginov, A. G. Mar’in and V. A. Aver’yanov - Monolithic Lining for Steel-Pouring Ladles
New Developments in the Modernization and Repair of Hydraulic Equipment (from results of the Second Seminar on Hydraulics in Magnitogorsk)
A. N. Nikulin and V. V. Streletskii - Deformation of Continuous-Cast Metal During Rotary Rolling
E. I. Panov - Effect of the Parameters of Helical Rolling on the Magnitude of the Circumferential Stresses that Develop in Solid Semifinished Products
A. A. Bersenev, Yu. B. Chechulin, S. M. Kiselev, V. V. Uzyukin and Yu. V. Pesin, et al. - Standardization of the Technology Used to Make Artificial Reflectors for the Ultrasonic Inspection of Tubes
E. S. Senokosov and A. E. Senokosov - Plasma Electric-Arc Cleaning of Metal Products
I. G. Rodionova, O. N. Baklanova, G. A. Filippov, I. I. Reformatskaya and A. N. Podobaev, et al. - The Role of Nonmetallic Inclusions in Accelerating the Local Corrosion of Metal Products Made of Plain-Carbon and Low-Alloy Steels
S. D. Zinchenko, A. M. Lamukhin, M. V. Filatov, S. V. Efimov and I. G. Rodionova, et al. - Development of Recommendations on Making Tube Steels Produced at the Severstal’ Combine Cleaner with Respect to Corrosion-Active Nonmetallic Inclusions
A. V. Dub, N. V. Barulenkova, T. V. Morozova, S. V. Efimov and V. N. Filatov, et al. - Nonmetallic Inclusions in Low-Alloy Tube Steel
V. A. Golubtsov, A. A. Voronin, T. V. Tetyueva, V. E. Roshchin and R. G. Usmanov - Origin of Nonmetallic Inclusions and Ways of Alleviating Their Contamination of Steel
P. V. Terekhov, V. K. Kalent’ev and D. Sh. Muratov - Radiographic Films for Nondestructive Testing
New Developments in the Modernization and Repair of Hydraulic Equipment (from results of the Second Seminar on Hydraulics in Magnitogorsk)
G. V. Zubchenko - Improving the Water-Proofing of Cleaning Facilities Without Disrupting Their Operation
E. A. Visloguzova, A. S. Ustenko, E. V. Shekhovtsov, S. A. Remigo and A. N. Groshev - Comparative Analysis of the Operation of Lances in a Unit Designed for the Desulfurization of Semifinished Products
V. N. Shklyar and E. R. Larikova - Mastery of the Production of Slag-Forming Mixtures at the Nizhniy Tagil Metallurgical Combine
I. G. Rodionova, O. N. Baklanova, E. T. Shapovalov, N. I. Endel' and I. I. Reformatskaya, et al. - Methods of Evaluating the Corrosion Resistance of Low-Alloy and Carbon Tube Steels under the Service Conditions of Oil and Gas Pipelines
E. N. Golovkova, G. I. Kotel'nikov, A. A. Tolstolutskii, K. L. Kosyrev and N. I. Fartushnyi, et al. - Analysis of the Processes Involved in Refining Steel at the Tagmet Combine to Remove Corrosion-Active Nonmetallic Inclusions
S. Yu. Nastich, Yu. D. Morozov, V. N. Marchenko, A. M. Stepashin and V. V. Zyryanov, et al. - Development and Commercial Use of Weldable High-Strength Cold-Resistant Steel for Load-Bearing Structures in Transportation Engineering
A. A. Mitrofanov and V. K. Smirnov - Analysis of the Production of I-Beams on a Universal Beam Mill
B. V. Krokhin - Furnaces for Rolling Mills at the Nizhniy Tagil Metallurgical Combine
P. Vanya, Yu. Vanya and L. Mrokvia - Use of a Reducing Melt to Treat the Surface of High-Alloy Steels and Alloys
V. T. Strebkov - Anti-Corrosion Protection for Structural Members and Buildings at Metallurgical Plants
A. V. Golovanov, G. A. Men'shikova, S. D. Zinchenko, S. V. Efimov and E. S. Popov, et al. - Mastering the Production of Rolled Products and Tubes of Steel 20-KSKh Guaranteed to Be Free of Corrosion-Active Nonmetallic Inclusions
M. Yu. Matrosov, L. I. Efron, V. I. Il'inskii, I. Yu. Severinets and Yu. I. Lipunov, et al. - Use of Accelerated Cooling to Improve the Mechanical and Processing Properties of Rolled Plates Used to Make Large-Diameter Gas-Line Pipe
V. V. Geier, T. N. Popova, V. N. Nikitin and S. I. Kiselev - Development and Production of Weldable High-Strength Steels with a Yield Point in the Range from 600 to 950 N/mm2
Yu. D. Yashin, S. A. Soldatkin and P. Yu. Chesnokov - High-Machineability Steels
V. I. Slavov, V. I. Malygin, V. A. Bazanov, A. A. Komkov and V. N. Serebryanyi - Effect of Shock Loading with Ultrasound on the Structure and Properties of the Metal of Welds and Products
E. A. Garber, V. O. Gusarov, E. V. Diligenskii and V. V. Kuznetsov - Modeling the Thermal Regime of a Cold-Rolling Mill with Allowance for Differences in the Cooling Conditions for the Top and Bottom Rolls
E. A. Kharitonov, P. L. Alekseev and V. P. Romanenko - Measurement of Semifinished-Product Temperature During Shaping Operations Using a Thermal Imaging Method
E. Kh. Shakhpazov, G. A. Dorofeev, A. V. Shelyagovich and S. V. Rudnev - Effect of Composites of the Sintikom Class on Iron Losses in Converter Steelmaking
A. F. Sarychev, O. A. Nikolaev, T. S. Masal'skii and M. A. Bogatov - Refining Steel in the Tundish
I. I. Lube, A. A. Pecheritsa, I. V. Neklyudov, I. G. Rodionova and A. I. Zaitsev, et al. - Study of the Effect of Process Parameters in Steel Production on the Content of Corrosion-Active Nonmetallic Inclusions in Corrosion-Resistant Pipes
Yu. V. Bodrov, A. I. Grekhov, P. Yu. Gorozhanin, M. N. Lefler and S. Yu. Zhukova, et al. - Evaluating Pipes from the Sinarskii Pipe Plant Based on their Content of Corrosion-Active Nonmetallic Inclusions
E. I. Panov - Shear Stresses and their Dependence on Different Process Parameters in the Helical Rolling of Solid Semifinished Products
V. P. Pavlov, P. Vanya, Yu. Vanya, S. S. Ivanov and S. S. Khlamkova - Advantages of a Technology for the Hydride Pickling of High-Alloy Steels and Alloys
A. V. Shitov, A. N. Klimushkin, O. A. Stolyarskii, E. N. Agapeev and P. V. Lobachev - Recylcing of the Dross Formed in Hot Galvanizing
I. O. Volkova - New Energy-Conservation Trends in Metallurgy
P. I. Yugov - Mechanism and Kinetics of Optimized Slag Formation in an Oxygen Converter
Yu. A. Bodyaev, A. A. Stepanova and V. V. Frolov - Refining and Out-of-Furnace Treatment of IF-Steel in the Oxygen-Converter Shop at the MMK
I. G. Rodionova, E. T. Shapovalov, M. E. Kovalevskaya, O. N. Baklanova and D. A. Burko, et al. - Increasing the Resistance of Automobile Sheet to Atmospheric Corrosion by Optimizing its Chemical Composition and the Parameters of the Manufacturing Process
O. B. Isaev - Effectiveness of Using Large Cooling Elements to Alleviate Axial Segregation in Continuous-Cast Ingots
B. L. Krasnyi - Use of Special Refractories in Electrothermal and Refining Equipment
I. I. Kuz'minov, O. V. Vinokurov, Yu. A. Sabel'nikov, S. V. Zubkov and A. V. Dolzhenko, et al. - Reducing the Incidence of Tin Plate Rejection for Torn Edges after Annealing in Bell-Type Furnaces
A. V. Protasov - The Work of VNIIMETMASh in Creating High-Tech Equipment for Different Sectors of Industry
O. Serikov - Modern Materials: Bimetallic Tubes
Yu. P. Kryuchkov and D. A. Boldyrev - Compact Process for the Spheroidizing Treatment of Cast-Iron Melts with a Magnesium-Bearing Inoculant
E. Kh. Shakhpazov, A. V. Shelyagovich and G. A. Dorofeev - Effect of the Composition and Quality Characteristics of the Metallic Charge on the Operational Indices of Converter Steelmaking
V. A. Spirin, S. B. Chernavin, V. V. Kabluka, V. V. Kulakov and V. M. Matus, et al. - Introduction of a System for Intensifying Steelmaking in a DSP 100 Arc Furnace at Ural Steel
A. G. Radyuk, A. E. Titlaynov, B. A. Sivak and A. S. Gritsan - Eliminating Gaps between the Walls of Sectional Continuous-Caster Molds by the Application of Sprayed Metal Coatings
A. G. Lyal'kov, V. I. Markovich, V. V. Masnyi, I. V. Neklyudov and V. B. Gankin, et al. - Modernization of Continuous Casters for Casting Rounds at the Volga Pipe Plant
S. M. Andreev, B. N. Parsunkin and D. Yu. Zhadinskii - Obtaining Reliable Information on Energy-Saving Regimes for the Heating of Continuous-Cast Semifinished Products Prior to Rolling
B. S. Chaikin, R. A. Doronin and A. V. Balasanov - Mini-Unit for Making Pig Iron in Liquid-Phase-Reduction Furnaces
A. A. Stepanov, S. D. Zinchenko, S. V. Efimov, V. G. Ordin and M. V. Filatov, et al. - Main Trends in the Growth of Converter Steelmaking at the Company Severstal'
V. A. Sinel'nikov, V. Ya. Genkin and A. V. Leites - Types of Continuous Casters and the Quality of Continuous-Cast Slabs for Obtaining Rolled Products for Crucial Applications
L. V. Bulanov and L. G. Korzunin - Theoretical Principles of the Design and Reconfiguration of Curvilinear Continuous Casters
V. I. Kotenok - Improving the Tools Used for Rolling Rings in Helical Passes
V. V. Ul'yanov, A. V. Shchedrin, V. M. Skoromnov, A. A. Bekaev and O. Khrisanov, et al. - Improving Combination Methods of Reduction and Piercing
Introduction of an Innovative Technology for the Underground Beneficiation of Copper Ore and Its Subsequent Extraction and Electrowinning
I. V. Babaitsev, N. I. Akinin, O. P. Tarasova and T. A. Lushina - Mechanism of the effect of retardants on the combustion of gas-air mixtures
E. N. Chumachenko and N. N. Grunin - Problems with making industrial use of the superplasticity of metals and alloys during their shaping
G. Yu. Kryachko, G. I. Orel, P. A. Vasyuchenko and L. A. Safina - Maintaining the working profile of blast furnaces during service
A. A. Svyazhin and E. Krushke - Mixing of the metal and mass transfer during the tapping of a semifinished product from an oxygen converter
V. V. Parusov, I. V. Derevyanchenko, A. B. Sychkov, A. M. Nesterenko and E. V. Parusov, et al. - Ensuring high quality indices for the wire rod used to make metal cord
V. G. Kashakashvili, S. Ya. Kurashvili, A. G. Gordeziani and A. N. Gagnidze - Effect of thermomechanical factors on the properties of steel 15GFB
Yu. I. Pashkov, V. A. Ivanov and S. A. Savel’ev - Stability of the mechanical properties of welds along pipes butt-joined by resistance welding with the use of high-frequency current
Yu. G. Bondar’, Yu. N. Belobrov, A. A. Kalashnikov, Yu. Yu. Reuka and A. A. Tunik - Modern cutting line in a plate-finishing section
V. A. Nevidomskii, V. M. Gramatnyi and V. P. Gulida - Technological aspects of the production of large semifinished products for parts and components of various types of equipment at the Novokramatorsk Machine Plant
B. M. Boranbaev, V. N. Vakulin, V. V. Kamendov, G. V. Abramin and B. L. Zhurakovskii, et al. - Charging apparatus with a revolving distributor: Five years of successful operation on blast furnace No. 3 at the Bhilai Metallurgical Plant
A. M. Longinov, I. A. Petushkov, S. V. Efimov, Yu. M. Aizin and A. V. Kuklev, et al. - Behavior of carbon and nitrogen during the continuous casting of IF-type steels with the use of different slag-forming compositions
M. M. Strashnov and Ya. L. Kats - Calculation of the optimum operating parameters of a DSP-60/70 arc steelmaking furnace to reduce its consumption of electric power
L. G. Marchenko, I. Yu. Pyshmintsev, Yu. V. Samaryanov, V. V. Mul’chin and R. N. Fartushnyi - Prospects for the production of welded and seamless tubes at reduced temperatures
V. S. Pyzhov, A. L. Podkorytov and E. M. Komel’kov - Improving the techniques and technology for the rough grinding of metal at the Chelyabinsk Metallurgical Combine